Kdsi

VERTICAL AUTOCLAVE

Standard models of Vertical Autoclave units manufactured by KDSI are available with chamber versions of 22 liters to 175 liters, which accommodate two and three drums accordingly. These systems are designed to meet effective sterilization requirements in bacteriological and research laboratories, hospitals and clinics and food and beverage units. The vertical chamber design maximizes space usage, while the microprocessor control system enables the machine to operate comfortably at all times.

SALIENTFEATURES

  • Internal and External Chamber, SS Made from grade 304
  • Bucket / basket made of stainless steel
  • Water Level Indicators
  • Closing via radial locking system
  • The seal of lid by Neoprene rubber gasket
  • The lid is applied with pressure gauge, spring loaded safety valve.
  • Operating range from 15psi to 20psi pressure
  • Sterilizing temperature up to 1340C
  • The required pressure was tested up to 2.5 times
  • Voltage: 220V AC (50Hz)

APPLICATIONS

  • Laboratories
  • Hospitals
  • Nursing Homes
  • Pharmaceutical
  • Food & Beverage Industries and Institutions
Category:

Specifications:

Model: KDSI/VA-22 KDSI/VA-40 KDSI/VA-50 KDSI/VA-95 KDSI/VA-175
Internal Tank Capacity 22 Liter 40 Liter 50 Liter 95 Liter 175 Liter
Load 2.00 KW 3.00 KW 3.00 KW 4.00 KW 6.00 KW
Chamber dimension 10” x 18” 12” x 22” 14” x 22” 18” x 24” 22” x 36”
No.of Drums & Sizes 2 (9” x11”) 2 (9” x11”) 2 (12” x 15”) 3 (12” x 15”)
Working Pressure 1.2 kgf/cm sq.g (15 psi – 17 psi) (Can be Upgraded up to 30 PSI)
Sterilizing Temperature 121°C to 134°C (150°C – Optional)
Heat Average <=±1°C
Sterilization Time 25 to 30 Minutes
Digital Timer 0 to 99 min
Construction Double / Triple Wall and SS GMP Construction
Outer Chamber Mild Steel (304 stainless Steel – Optional)
Inner Chamber 304 SS (316 / 316L grades Stainless Steel – Optional)
Insulation Glass Wool
Waste Container Stainless Steel
Door / Lid Lift with foot protection and interlock device
Door Locking type Radial Type (Wing Nut Optional)
Water Filling & Removal Manual
Safety Features Radial locking, safety valve, low water detector and pressure interlock
Optional accessories – PID Controller
– Low/high water cut-off device
– Digital alarm
– temperature recorder
– dot matrix printer
– RS 232/USB PC connection port
– NABL authentication
– Stainless Steel Wire Mesh Carrier
– Dressing drums
– Sterilization indicator tape
– Autoclave bag
– PLC control system
– IQ / OQ / PQ Documentation
Power Supply 220Volts / 440 Volts

Reviews

There are no reviews yet.

Be the first to review “VERTICAL AUTOCLAVE”

Your email address will not be published. Required fields are marked *