Kdsi

FUME HOOD

KDSI Laboratory Fume Hood Station is available in various sizes and dimensions to meet the specific requirements of your research. These smoke hoods have the option to produce vertical or horizontal sliding sashes and MS or stainless steel. The standard sizes of our fume hood are available in most demanding requirements (4 feet, 5 feet, 6 feet and 8 feet).

FEATURES :

  • Low Cost.
  • Low Noise.
  • User Friendly Ergonomic Design.
  • Generates a negative pressure inside the hood, allowing it to remove all contaminated substances from the work area in the atmosphere.
  • Original material of thick board wood front back top and outer surfaces are covered with formica. Or cold rolled steel duly powder coated or stainless steel (SS-304) (as ordered).
  • All internal surfaces are sealed and checked for leakage.
  • Work table is made of Granite and a small S.S. with water tap connection. Has been installed with sync.
  • Work area has been fitted to the unit by fluorescent light.
  • The front door hiding counter moves up and down with balanced weight.
  • The bellows and motor assemblies are statistically and dynamically balanced and operated with a minimum noise level.
  • The work table provides the working condition of comfortable “SIT down” for the operator.
  • Front facing panel has been installed with a 15/5 amp. socket with the switch for the exhaust system and fluorescent light.
  • Supplied complete with cord & plug to work on Single Phase 220/230 volts AC. supply.
Category:

Fume Hood Specifications:

Model No: KDSI/FH-51 KDSI/FH-52 KDSI/FH-53 KDSI/FH-54
Working Table Size 2′ x 2′ 3′ x 2′ 4′ x 2′ 6′ x 2′
Working Size 2′ x 2′ x 2′ 3′ x 2′ x 2′ 4′ x 2′ x 2′ 6′ x 2′ x 2′
No. of Motor/Blower 1 1 1 1
Illumination 1 x 40 w 1 x 40 w 1 x 40 w 1 x 40 w
Construction (Work Table ):- Granite
Outer :- GIPC
Lighting Fluroscentlight  withvapour- Proof for proper illumination. Intensity Approx 400lux on work top.
Motor 3 Phase TEFS, IP55, Class F continuous rated. / Single phase.
PVC Fume Duct Size 6 inch
Working Table Top Fitted with acid/alkali resistant tile and p.p sink fitted with swan type water tap.
Sash (Shutter) Vertical rising sash counter – balanced with pulley & counter weight system. Toughned float glass (4mm tick) clear open able height of 700mm.
Maximum air exhaust air volume Minimum face velocity of 0.5m/s or 100 fpm at defined sash position
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Standard Accessory Gas/Air cock fitted with 15/5 amp 3pc socket with switches
Electric Supply AC 230V , 50/60Hz

Customizable sizes are also available

OPTIONAL FEATURES OF FUME HOOD

PVC Fume Duct Available at Extra Cost per running feet
Storage Compartments Door to the mounting base and extra cost under the work table with mounting drawer
SS Lining on Working Walls Can be done at an additional cost
FRPLining on Working Walls Can be done at an additional cost
Lead Lining on Working Walls Radio-Isotope for use as a fume hood
Duct Less Fume Hoods Are Also Available

Reviews

There are no reviews yet.

Be the first to review “FUME HOOD”

Your email address will not be published. Required fields are marked *