Kdsi

DISPENSING & SAMPLING BOOTH

Dispensing / sampling booth provides a safe, HEPA filtered environment for the distribution of dangerous drug powder. Air is removed from the rear-wall pre-filter, trapping powder; the roof-mounted high-efficiency Particulate Air (HEPA) filter has been made efficient at 99.99% efficient at 0.3 microns. Protects operators from toxic chemicals / raw materials used to manufacture bullets, medicines, capsules etc. through external contamination during the weight loss process. Or measuring. This is ideal where a high degree of flexibility is desired. The container is obtained by air circulation. The product is also known as Pharmaceutical Sampling Booth and Pharmaceutical Dispensing Booth.

SPECIAL FEATURES:

  • Designed according to WHO-GMP.
  • 3-step filtration such as prefilter, fine filter, HEPA filter.
  • Heavy duty low noise motor blower assembly.
  • Weight machine is suitable for adjusting on the floor and table top to keep 5. Negative pressure within the booth prevents the fine powder from escaping from the work area.
  • Fully integrated system
  • Easy installation and economical.
  • Stainless steel AISI 304 structure.
  • Dynamic gasket to guarantee the correct seal of the filter
  • Down cross is equipped with N°3 fans with AC frequency control.
  • Corrosion-resistant external and internal
  • Strong construction

APPLICATIONS

  • Product Dispensing
  • Large scale dispensing & weighing
  • Pharma Industry
  • Dispensing of raw materials
  • Chemical industry

OPERATING PRINCIPLE:

The downstream compacted air is removed at the lower level in the filtration system of the booth, where dust particles are implanted at each level of filtration, before returning back into the air stream of the booth. When the booths are working under normal conditions, the wind is drawn through the main grounding chamber to the exit gills, which are usually located behind the booths, which suppress the air-borne dust away from the breathing zone.

CONSTRUCTION DETAILS

All powder distribution / sampling booths are available in the following materials of manufacture based on customer’s choice.

  • G.I. With powder coated finish.
  • Fully stainless steel with satin finish (Gr-304 / Gr-316)
  • Polycarbonate curtains
Category:

Specifications:

Type Front Open
Direction of flow Vertical
Material of Construction SS304 / SS316 or G I Powder Coated
Cleanliness Class 100 as per US FED STD 209E (IS 14644-1)
Particle Retention 0.3 micron
Noise Level 65dB
Velocity 120 FPM ± 20%
Illumination Fluorescent tubes diffusers
Light intensity 800 LUX
Power Supply 230V Single Phase, 50 Hz
Motor / Blower assembly Direct drive continuous duty ¼ HP with sealed bearings.
Filters Aluminum framed HEPA filter with a minimum efficiency of 99.99% on 0.3 microns.

Reviews

There are no reviews yet.

Be the first to review “DISPENSING & SAMPLING BOOTH”

Your email address will not be published. Required fields are marked *